B65-359 INFILL SMOOTHING PLANE. John Holland. Unsigned which is normal for Holland, but the design is unmistakable. Cast iron body with 7-3/16" tapered sole, rosewood fill and wedge, brass bridge, 2" I. & H. Sorby iron with Mathieson chip breaker. 3/4" shallow gouge on the right side of the rear bun and some small chips from the heel, the hollow on the reverse of the wedge has been enlarged, probably to accommodate the replacement iron, which has resulted in a small chip from the bottom edge. Some very light pitting near the heel. From a legendary collection of infill planes. Good 300-500